Workshop/Repair documentation for the Canon Cat is here.
The Canon Cat was a task-dedicated, desktop computer released by Canon Inc. in 1987 at a price of US$1495. On the surface it was not unlike the dedicated word processors popular in the late 1970s to early 1980s, but it was far more powerful and incorporated many unique ideas for data manipulation.
The Canon Cat was primarily the creation of Jef Raskin, originator of the Macintosh project at Apple. After leaving the company in 1982, he began designing a new computer closer to his original vision of an inexpensive, utilitarian "people's computer"; BYTE in 1987 described the Cat as "a spiritual heir to the Macintosh". It featured a text user interface, not making use of any mouse, icons, or graphics. All data was seen as a long "stream" of text broken into several pages. Instead of using a traditional command line interface or menu system, the Cat made use of its special keyboard, with commands being activated by holding down a "Use Front" key and pressing another key. The Cat also used special "Leap keys" which, when held down, allowed the user to incrementally search for strings of characters.
Keyboard of the Canon Cat and the red "leap" keys, used for instant inline searching. The machine's hardware consisted of a 9-inch (229 mm) black-and-white monitor, a single 3½-inch 256 KB floppy disk drive and an IBM Selectric–compatible keyboard. It used a Motorola 68000 CPU (like the Macintosh, Lisa, Atari ST and Amiga) running at 5 MHz, had 256 KB of RAM, and an internal 300/1200 bit/s modem. Setup and user preference data was stored in 8 KB of non-volatile (battery backed-up) RAM. The Cat's array of I/O interfaces encompassed one Centronics parallel port, one RS-232C serial port (DB-25), and two RJ11 telephone jacks for the modem loop. The total weight of the system was 17 pounds (7.7 kg).
An extensive range of application software was built into 256 KB of ROM: standard office suite programs, communications, a 90,000 word spelling dictionary, and user programming toolchains for Forth and assembly language.
Often considered a text-only machine, the Cat included graphics routines in ROM as well as connectors for a mouse or other pointing device that were never used.
There was a software project no longer under development, initiated by Raskin, to develop a similar yet even more capable system for today's computing systems. The project (called Archy) was designed to eventually replace current software interfaces.
Also, from the above MAME link, I've found this list of commands using `Use Front Labels` (control) + the following keystrokes operate the following commands:
Canon cat blue "Use Front Labels":
` (really degree, +-, paragraph-mark and section-mark): LEFT MARGIN
+=: RIGHT MARGIN
UNDO: SPELL CHECK LEAP (this is actually a red LEAP label)
PERM SPACE/TAB: SET/CLEAR TAB
Q: UNDER LINE
T: Paragraph STYLE
U: LINE SPACE
O: ADD SPELLING
[ (really 1/4, 1/2, double-underline and |): SETUP
Backspace (really ERASE): ANSWER
LOCK: DOCUMENT LOCK
D: SEND CONTROL
Colon: FORMAT/WIPE DISK (only when wheel! mode is enabled, see below)
Enter (really RETURN): SEND
X: LOCAL LEAP
Pgup (really DOCUMENT/PAGE): TITLES
Leap Left: LEAP AGAIN (left)
Leap Right: LEAP AGAIN (right)
Canon cat credits easter egg:
* hold either leap key, then simultaneously hold shift, then type Q W E R A S D F Z X C V and release all the keys [note: I couldn't get this one to work]
* hit EXPLAIN (use front + N) and the credits screen will be displayed
September 22, 2018 Subject:
What are the keybindings for the special function keys of cat/swype on a standard modern keyboard so this can be explored?